TransTEC drone led light bar

$22$0

Product overview

Easy way for light on/ off / colors switch by just manually press one button


1. the light is on when power up.

2. Press (K1) for 2 seconds to enter the color setting (all lights flash), pass the switch (K1, K2 to switch the color); after switching the color, press and hold (K1) for 2 seconds to save & exit the current mode.

3. Press (K2) for 2 seconds to enter the brightness setting (all lights flash twice), K1 controls brightness +, K2 controls brightness - ; after adjusting the brightness, press and hold (K2) for 2 seconds to save & exit the current mode.

4. Press K1 for 4 seconds to enter sleep mode (lights off). When you need to illuminate the light, just press K1 slightly.

 

In the color setting mode, if you exit the current mode without saving, the brightness could not be adjusted.

In the brightness setting mode, if you exit the current mode without saving, the color could not be set.

 

After setting the brightness or color, you need to save it. Otherwise it will not save the last operation after powering up again next time.

The Buttons K1 and K2 are on the taillight board (6 panel).

Note: Recommed to install capacitor


Specifications
  • Item: TransTEC drone led light bar
  • MCU control panel dim: 44mm*18mm
  • Led strip dim: 33mm*6mm
  • Led strip number: 4 lights in a strip* 10pcs
  • Net weight: 8.5g
  • Feature: light strips can be cut directly from the tail end
  • Package dim: 10*7*4mm
  • Gross weight: 46g
  • Input power of motherboard: 6-30V input
  • Output of motherboard: 5V/5A
  • Board voltage of 4 light board: 5V
  • Working current of 4 light board: 90MA
  • Package Dim: 10*7*4mm
  • Gross Weight: 0.050 Kilogram
Related download
Product Reviews
  • Evaluation list